【TeeChart Pro ActiveX教程】（十三）：图表面板上的自定义绘图（上）-控件新闻-慧都网

【TeeChart Pro ActiveX教程】（十三）：图表面板上的自定义绘图（上）

翻译|使用教程|编辑：王香|2019-01-03 11:13:09.000|阅读 276 次

概述：TeeChart通过Canvas对象提供广泛的自定义绘图工具。使用Canvas，您可以在“Chart Panel”的任何位置添加形状，线条和文本，并定义其颜色，笔和画笔样式。

# 慧都年终大促·界面/图表报表/文档/IDE等千款热门软控件火热促销中 >>

TeeChart画布

绘图顺序

使用TeeChart的Canvas方法时，请记住绘图顺序很重要。在图表上绘制一条线然后添加系列数据点将导致线透支。有四个主要的图表绘制事件，按顺序排列：

BeforeDraw事件
BeforeDrawAxes事件
BeforeDrawSeries事件
AfterDraw事件

[C#]

private bool afterDraw; 
private bool beforeDraw; 
private bool beforeDrawAxis; 
private bool beforeDrawSeries; 
 
private void Form1_Load(object sender, System.EventArgs e) {  
     SetFlags(ref beforeDraw); 
     Bar bar1 = new Bar(tChart1.Chart); 
     bar1.FillSampleValues(20); 
     radioButton1.Checked = true; 
} 
private void SetFlags(ref bool Flag) { 
     beforeDraw = false; 
     afterDraw = false; 
     beforeDrawAxis = false; 
     beforeDrawSeries = false; 
     Flag = true; 
} 
private void DrawShape(Steema.TeeChart.Drawing.Graphics3D gg) { 
     gg.Brush.Color = Color.Yellow; 
     gg.Pen.Visible = true; 
     gg.Pen.Style = System.Drawing.Drawing2D.DashStyle.Dash; 
     gg.Brush.Visible = true; 
     gg.Ellipse(1,1,gg.Chart.Width - 1,gg.Chart.Height - 1); 
} 
private void tChart1_AfterDraw(object sender, Steema.TeeChart.Drawing.Graphics3D g) { 
     if(afterDraw) { 
     DrawShape(g); 
    } 
} 
private void tChart1_BeforeDraw(object sender, Steema.TeeChart.Drawing.Graphics3D g) { 
     if(beforeDraw) { 
     DrawShape(g); 
    } 
} 
private void tChart1_BeforeDrawAxes(object sender, Steema.TeeChart.Drawing.Graphics3D g) { 
     if(beforeDrawAxis) { 
     DrawShape(g); 
    } 
} 
private void tChart1_BeforeDrawSeries(object sender, Steema.TeeChart.Drawing.Graphics3D g) { 
     if(beforeDrawSeries) { 
     DrawShape(g); 
    } 
} 
private void radioButton4_Click(object sender, System.EventArgs e) { 
     SetFlags(ref afterDraw); 
     tChart1.Refresh(); 
} 
private void radioButton3_Click(object sender, System.EventArgs e) { 
     SetFlags(ref beforeDrawSeries); 
     tChart1.Refresh(); 
} 
private void radioButton2_Click(object sender, System.EventArgs e) { 
     SetFlags(ref beforeDrawAxis); 
     tChart1.Refresh(); 
} 
private void radioButton1_Click(object sender, System.EventArgs e) { 
     SetFlags(ref beforeDraw); 
     tChart1.Refresh(); 
}

[VB.Net]

Private BeforeDraw As Boolean 
Private BeforeDrawAxis As Boolean 
Private BeforeDrawSeries As Boolean 
Private AfterDraw As Boolean 
 
Private Sub Form1_Load(ByVal sender As System.Object, ByVal e As System.EventArgs) Handles MyBase.Load 
    SetFlags(BeforeDraw) 
    Dim Bar1 As New Steema.TeeChart.Styles.Bar(TChart1.Chart) 
    Bar1.FillSampleValues(20) 
    RadioButton1.Checked = True 
End Sub 
Private Sub SetFlags(ByRef Flag As Boolean) 
    BeforeDraw = False 
    BeforeDrawAxis = False 
    BeforeDrawSeries = False 
    AfterDraw = False 
    Flag = True 
End Sub 
Private Sub DrawShape(ByVal gg As Steema.TeeChart.Drawing.Graphics3D) 
    gg.Brush.Color = Color.Yellow 
    gg.Pen.Visible = True 
    gg.Pen.Style = Drawing.Drawing2D.DashStyle.Dash 
    gg.Brush.Visible = True 
    gg.Ellipse(1, 1, gg.Chart.Width - 1, gg.Chart.Height - 1) 
End Sub 
Private Sub TChart1_AfterDraw(ByVal sender As Object, ByVal g As Steema.TeeChart.Drawing.Graphics3D) Handles TChart1.AfterDraw 
    If AfterDraw = True Then 
     DrawShape(g) 
    End If 
End Sub 
Private Sub TChart1_BeforeDraw(ByVal sender As Object, ByVal g As Steema.TeeChart.Drawing.Graphics3D) Handles TChart1.BeforeDraw 
    If BeforeDraw = True Then 
     DrawShape(g) 
    End If 
End Sub 
Private Sub TChart1_BeforeDrawAxes(ByVal sender As Object, ByVal g As Steema.TeeChart.Drawing.Graphics3D) Handles TChart1.BeforeDrawAxes 
    If BeforeDrawAxis = True Then 
     DrawShape(g) 
    End If 
End Sub 
Private Sub TChart1_BeforeDrawSeries(ByVal sender As Object, ByVal g As Steema.TeeChart.Drawing.Graphics3D) Handles TChart1.BeforeDrawSeries 
    If BeforeDrawSeries = True Then 
     DrawShape(g) 
    End If 
End Sub 
Private Sub RadioButton4_Click(ByVal sender As Object, ByVal e As System.EventArgs) Handles RadioButton4.Click 
    SetFlags(AfterDraw) 
    TChart1.Refresh() 
End Sub 
Private Sub RadioButton3_Click(ByVal sender As Object, ByVal e As System.EventArgs) Handles RadioButton3.Click 
    SetFlags(BeforeDrawSeries) 
    TChart1.Refresh() 
End Sub 
Private Sub RadioButton2_Click(ByVal sender As Object, ByVal e As System.EventArgs) Handles RadioButton2.Click 
    SetFlags(BeforeDrawAxis) 
    TChart1.Refresh() 
End Sub 
Private Sub RadioButton1_Click(ByVal sender As Object, ByVal e As System.EventArgs) Handles RadioButton1.Click 
    SetFlags(BeforeDraw) 
    TChart1.Refresh() 
End Sub

确保将自定义绘制的项目保存到Canvas

如果不在其中一个Chart事件中调用Canvas绘制代码，则自定义绘图将不会永久保存到Canvas，从而导致在应用程序最小化时丢失任何添加内容或另一个窗口放在它上面。您的代码不需要直接驻留在Chart事件中; 如果将代码放在BeforeDrawSeries / AfterDraw中并且检查运行时设置的标记，则可以在图表窗口的生命周期中保存用户绘制的项目。当活动标记为true时，绘制方法因此运行绘制代码，如上例所示。

绘制线

让我们添加一个画布线：示例（从左上角到右下角对角画一条线）

[C#]

private void Form1_Load（object sender，System.EventArgs e）{ 
        line1.FillSampleValues（20）; 
        line1.VertAxis = VerticalAxis.Both; 
        line1.HorizAxis = HorizontalAxis.Both; 
        tChart1.Aspect.View3D = false; 
} 
 
private void tChart1_AfterDraw（object sender，Steema.TeeChart.Drawing.Graphics3D g）{ 
        Point s = new Point（tChart1.Axes.Left.Position，tChart1.Axes.Top.Position）; 
        点e =新点（tChart1.Axes.Right.Position，tChart1.Axes.Bottom.Position）; 
        g.MoveTo（一个或多个）; 
        g.LineTo（E，0）; 
}

[VB.Net]

Private Sub Form1_Load(ByVal sender As System.Object, ByVal e As System.EventArgs) Handles MyBase.Load 
        Line1.FillSampleValues(20) 
        Line1.VertAxis = Steema.TeeChart.VerticalAxis.Both 
        Line1.HorizAxis = Steema.TeeChart.HorizontalAxis.Both 
        TChart1.Aspect.View3D = False 
End Sub 
 
Private Sub TChart1_AfterDraw(ByVal sender As Object, ByVal g As Steema.TeeChart.Drawing.Graphics3D) Handles TChart1.AfterDraw 
        Dim S As New Point(TChart1.Axes.Left.Position, TChart1.Axes.Top.Position) 
        Dim E As New Point(TChart1.Axes.Right.Position, TChart1.Axes.Bottom.Position) 
        g.MoveTo(S) 
        g.LineTo(E, 0) 
End Sub

在3D图表上，由于3D正交位移，轴位置偏离图表区域。我们可以相应地移动线：示例（在3D图表的图表区域中从左上角到右下角对角绘制一条线）

[C#]

private void Form1_Load(object sender, System.EventArgs e) { 
        line1.FillSampleValues(20); 
        line1.VertAxis = VerticalAxis.Both; 
        line1.HorizAxis = HorizontalAxis.Both; 
        tChart1.Aspect.Chart3DPercent = 50; 
} 
 
private void tChart1_AfterDraw(object sender, Steema.TeeChart.Drawing.Graphics3D g) { 
        Steema.TeeChart.Drawing.Point3D s = new Steema.TeeChart.Drawing.Point3D(); 
        s.X = tChart1.Axes.Left.Position; 
        s.Y = tChart1.Axes.Top.Position; 
        s.Z = 0; 
 
        Steema.TeeChart.Drawing.Point3D e = new Steema.TeeChart.Drawing.Point3D(); 
        e.X = tChart1.Axes.Right.Position; 
        e.Y = tChart1.Axes.Bottom.Position; 
        e.Z = tChart1.Aspect.Width3D; 
     
        g.MoveTo(s); 
        g.LineTo(e); 
}

[VB.Net]

Private Sub Form1_Load(ByVal sender As System.Object, ByVal e As System.EventArgs) Handles MyBase.Load 
        Line1.FillSampleValues(20) 
        Line1.VertAxis = Steema.TeeChart.VerticalAxis.Both 
        Line1.HorizAxis = Steema.TeeChart.HorizontalAxis.Both 
        TChart1.Aspect.Chart3DPercent = 50 
End Sub 
 
Private Sub TChart1_AfterDraw(ByVal sender As Object, ByVal g As Steema.TeeChart.Drawing.Graphics3D) Handles TChart1.AfterDraw 
        Dim S As New Steema.TeeChart.Drawing.Point3D() 
        S.X = TChart1.Axes.Left.Position 
        S.Y = TChart1.Axes.Top.Position 
        S.Z = 0 
 
        Dim E As New Steema.TeeChart.Drawing.Point3D() 
        E.X = TChart1.Axes.Right.Position 
        E.Y = TChart1.Axes.Bottom.Position 
        E.Z = TChart1.Aspect.Width3D 
 
        g.MoveTo(S) 
        g.LineTo(E) 
End Sub

画布笔和画笔

上面的线是使用为绘制线之前绘制的最后一个对象定义的笔和画笔绘制的。那可能是也可能不是你想要的笔。相应地更改笔：示例（在绘制线之前定义笔）

[C#]

private void tChart1_AfterDraw(object sender, Steema.TeeChart.Drawing.Graphics3D g) { 
        Point p5 = new Point(line1.CalcXPos(5), line1.CalcYPos(5)); 
        Point p15 = new Point(line1.CalcXPos(15), line1.CalcYPos(15)); 
        g.Pen.DashCap = System.Drawing.Drawing2D.DashCap.Triangle; 
        g.Pen.EndCap = System.Drawing.Drawing2D.LineCap.DiamondAnchor; 
        g.Pen.Style = System.Drawing.Drawing2D.DashStyle.DashDotDot; 
        g.Pen.Transparency = 70; 
        g.Pen.Width = 3; 
        g.Pen.Color = Color.BlueViolet; 
        g.MoveTo(p5); 
        g.LineTo(p15, 0); 
}

[VB.Net]

Private Sub TChart1_AfterDraw(ByVal sender As Object, ByVal g As Steema.TeeChart.Drawing.Graphics3D) Handles TChart1.AfterDraw 
        Dim P5 As New Point(Line1.CalcXPos(5), Line1.CalcYPos(5)) 
        Dim P15 As New Point(Line1.CalcXPos(15), Line1.CalcYPos(15)) 
        g.Pen.DashCap = System.Drawing.Drawing2D.DashCap.Triangle 
        g.Pen.EndCap = System.Drawing.Drawing2D.LineCap.DiamondAnchor 
        g.Pen.Style = System.Drawing.Drawing2D.DashStyle.DashDotDot 
        g.Pen.Transparency = 70 
        g.Pen.Width = 3 
        g.Pen.Color = Color.BlueViolet 
        g.MoveTo(P5) 
        g.LineTo(P15, 0) 
End Sub

购买TeeChart Pro AciveX正版授权，请点击“”哟！

标签：图表 ActiveX 图表控件 teechart

本站文章除注明转载外，均为本站原创或翻译。欢迎任何形式的转载，但请务必注明出处、不得修改原文相关链接，如果存在内容上的异议请邮件反馈至chenjj@capbkgr.cn

上一篇：【Stimulsoft Reports Flex教程】在查看器中显示报表下一篇：Aspose.BarCode for .NET命名空间介绍